The process of removing a Doona canopy may vary slightly depending on the exact model you have, but in general, the steps are as follows:Extend the Doona handle to the fully upright position.Locate the two small buttons on either side of the canopy connector that connects the canopy to the Doona frame.Press both of these buttons at the same time and hold them down.While holding down the buttons, lift the canopy up and away from the frame.Once the canopy is detached from the frame, you can remove it completely by sliding it off the connector.If you want to reattach the canopy, align the connectors on the canopy with the corresponding slots on the Doona frame and press down until you hear a click. Make sure the canopy is securely attached before using the Doona again.Note: Be sure to consult your Doona manual or contact the manufacturer if you encounter any difficulties while attempting to remove or attach the canopy.
